Brake pads Akebono or DIXCEL
Akebono makes very good pads.
Akebono pads are great.
That's a great price. Akebono is one of the OE suppliers to Honda and it looks like they either forgot to add the price of the pads or just left them out on purpose which would normally add at least an extra $50. $100 or a little over is normal price per rotor so that checks out and 1.25 hours is very cheap. Most shops would be closer to 2 hours to swap all that out.
Akebono are the best brakes a japanese car could get. I replaced my Civic brakes and rotors myself. Cost was around 200$ in parts from RockAuto. If it’s just one axle, I would consider ordering the parts yourself and doing to job on all tires for less. Plenty of YT videos out there. You could buy or borrow parts and do it for less. *I’m a 45 yo woman for reference.
Good prices and looks like quality pads. Akebono is good.
The rears are ACT828A.
I recommend using Akebono ceramic instead of OEM semi-metallic because they’re more gentle on the rotors and significantly less dusty.
Factory brake pads really are better but that's like the one part they seem to gouge the price on the worst, I usually try to get the closest thing to factory the aftermarket offers, you can usually get Akebono which might actually be the same as factory for quite a bit less on like Tire Rack or sometimes the local parts place will have them.
I put on Akebono pads and Raybestos rotors about 500 miles ago. Super squeaky with light brake pressure; I'm at the point I want to pull them apart and clean it all then reassemble.
Do not go for the CCBs they aren\u2019t any better on the road. Squeak like crazy when wet, and a pair of akebonos and you\u2019ll get minimal dust
Write your review
Help others - share your experience with this part.