Akebono pads if they make them for your application.
They are quiet and can tolerate cheaper chinese steel rotors.
I used Akebono pads and Zimmerman rotors. At first I didn't think they had the same bite as the OEM pads. After a few hundred miles they are good.
Akebono have been better for my 6 than the OEM. OEM pads are not all the same. They may meet the same minimum spec but not all are top tier. For example the rear brake pads on my 6 OEM were great and were made by TRW. the last set of OEM rear pads were from another manufacturer and are dusty and wear fast. My recent front OEM pads are the same. I'm going back to Akebono pads when the weather is better
Akebono proact brake pads paired with centric rotors. I like the centric premium rotors since they are painted on the edges and the hub mating surface. If those are too expensive then I'd go with centric c-tek rotors.
Akebono pads are usually excellent on hondas (I think they are oem?) As far as rotors, WBR and zimmerman are great. For an economy option you could try carquest pads/rotors. No matter which you go with, make sure to break them in properly because even the best pads/rotors will pulse if improperly broken in.
Running akebono here. Quiet, good for street use, and noticeably less dust compared to oem
I use Hawk 5.0 street pads and they’re way more affordable than OEM and produce less brake dust
Today I just installed Akebono ProACT (ceramic) in the rear. Very very happy with them. Stopping is still very good, they’re dead silent and dusting should be a ton less.
I've used hawk hp+ all last year and my first event of this year; they do serve as a pretty good intermediate pad, if I were you I'd go after something similar to it or slightly more track-oriented, but as I understand it the "HPS" pads are not designed for track use, more of just a capable street pad. The HP+ feel great for street driving, but be aware that they do create a fuckton of dust, and oftentimes they squeal like a school bus as you come to a stop. On track, I'd say they do fine for a beginner. I tend to brake on the early side and not as hard as I could, it's an area where I could certainly improve. I have noticed some brake fade at my most recent event, and for that reason I will be installing some G-loc r8's tomorrow, with a backup set of R12's for the front.
About a year ago I bought some Akebono ceramic brake pads for my 2016 and they have given me nothing but grief, notably the fronts whose retainer clips just straight up didn't fit into my caliper so I needed to reuse the stock ones and I also had to grind down the pad ears to fit properly. The fronts were particularly bad (part no. ACT1539).
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake discs FEBI got the first review!
The power steering pump OEM Volvo got the first review!
The brake pads OEM Infiniti got the first review!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best windshield already 14 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating battery for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
For headlights OEM Volkswagen already 50 reviews.
For brake caliper OEM Volkswagen already 25 reviews.
For tires GISLAVED already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
