Brake pads Bendix or OEM FORD
I got about 107,000 on my 06 and haven't needed to change the rotors yet. I just use Bendix Ceramic pads front and rear, we have always used Bendix stuff and never had any issues.
After 217k on my 93 Eurovan I am still on my original rotors. I do change pads every 35-40k usually Bendix
In terms of driving impressions, well...it feels heavy and clumsy around town. The steering is very heavy...forget twirling the wheel with a finger. The shifter is mounted low and away. It takes effort to shift, and it's very solid and mechanical (rod shifter). The clutch is progressive but the friction point is not very obvious. Ride is quite good, and push through the clumsy feeling and she can dance. Brakes are hysterically soft, typical for a SHO.
I was still on the original pads/rotors when I sold it back in '04 and not a day goes by that I don't miss it.
oh and i replaced my craptastic wagner thermoquiet pads with bendix pads much better feeling on the pad and the calipers dont seem to get so hot
Bendix Titanium pads with new rotors 4/20/02
I can't believe the brakes used here, this is after all the 'Sport' model out of the Taurus lineup so therefor it should have received a better braking setup.
I put in some new rear brake pads today. The frist brakes I had were Autozone brand. Well, they went on fine on the driver side. On the passenger side It was near impossible to push the piston back far enough to get the pads on. I still needed about another 1/16th of an inch. I even bled brakes a little to make room for the piston compression. Still no luck. So I went back and bought some Bendix that were about 1/16th less in thickness. So, I put them on the passanger side. I had to wrestle with the piston again - that mofo would not budge. Finally I got it. So, I go for a drive with Albany brakes on one side and Bendix on the other. A horrible scaping erupts from the driver's side. The side that went on much easier. Visual inspection looked ok. So I took them off and they were all scraped to heck. Strange, as that was the easy side. So, I put the Bendix pads on that side and everything is fine.
Write your review
Help others - share your experience with this part.