Hey, I track. MK7.5! The floating calipers flex which means you get more pressure on the outer half of the rotor. It's annoying but it's not a problem in my experience.
Something like a Carbotech XP12 pad might do better with the heat but adding brake ducts from the RS3 is cheap and will help quite a bit.
Girodisc should have a 357mm disc available when you've gone through the OE rotors. They're slotted instead of drilled and are 2 piece (aluminum hat).
I am currently using Carbotech XP10's in front and the XP8's for the rears. I really like them and have not had an issue so far. Plus the company has great customer service. They are definitely NOT a street pad, and I need to swap them the night before a track meet and put street pads on the day after, but the effort is worth it.
I just replaced my pads all around with Carbotech so i get majorly reduced brake dust and just OEM rotors.
If you KNOW you're going to be doing a lot of track days, you definitely want to go straight to some full blown track pads, at least for when you're at the track, along with fluid.
With the XP8s I had, I left early and bed my pads in on the way to the track.
Running Carbotech XP8 and XP10 here. They’re great on track, and also very usable on the street. I’m currently not switching back to my EBC Yellowstuff pads because the Carbotechs aren’t bad enough on the street to justify me switching pads (yes I’m a being a little lazy). They dust like mad though and are quite squeaky.
Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.
Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.
The xp12s are beasts. I pulled brake bias 1-click from full rear to get them balanced on level braking. This gives me one click for more rear, which was really enough for the track. I love late braking, and I can hammer these on a 20min session with NO change in performance.
PMU HC800+ was my dual duty pad and was a solid compromise. But end of the day it’s just that - a compromise
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
