Brake pads Carbotech or Project Mu
If your just daily driving then OEM is fine, if you're looking for a slight upgrade then I recommend Carbotech 1521 Bobcat pads. I have the Carbotechs and they are nice.
The best solution I have found is to use slotted rotors--cryo treatment typically gets me 10K more miles before hard spots develop and I get a pedal vibration--and an aggressive pad without any ceramics. My solution is to use the best quality slotted rotor I can find, cryo treatment preferred, and use either a Wilwood BP-10/20 pad or a Project Mu NS brake pad. I found those two pads were aggressive enough to have great stopping power and would wear out the rotor at the same rate the pad wore down.
When I had my mini cooper, I ran the 1521s on stock rotors and never had any issue in the rain.
I personally use Project Mu HC+800 for their fantastic cold bite and high temp resistance.
I have run the Carbotech 1521 on the street and can confirm they are low dust and noise, but not the most performance oriented.
I just changed my pads and rotors at all four corners asI was always very unhappy with the stock pads and rotors; mostly because of noise in the cold and the amount of brake dust the pads made. Upon inspection of my rotors, with barely 30k miles on them, there was a startling amount of material removed and channeling from the pads. I would totally recommend you replace the rotors at the same time. I too went with the ECS slotted and drilled rotors with Carbotech 1521 pads and love the setup. Very quiet, very little dust and good performance.
Carbotech Pads (F-CT682 & R-CT340 1521 Street Compound)
Carbotech XP12's are going on for this season with RE-71R's, went with XP8's before and should of done at least XP10's
I stand by Carbotechs. Whether it's my S2000 or heavy E90, they've done great is hard lapping all day long. Depending on the car, XP10s in front and XP8s in the back work well for most. You can call them and they'll recommend the right pad. Their super noisy for street use but brilliant on the track.
Yes forgot to mention mine only started this when switching over to carbotech pads. Stock pads I never saw this issue.
Write your review
Help others - share your experience with this part.