So i swapped out the OEM pads for some EBC sintered HH pads on my 22' Monster and I have to say the difference is night and day. Initially swapped the pads to try and fix the annoying brake shudder issue i had when slow braking to come to a stop (at a traffic light for example). Also I hated how the OEM pads felt. They were kind of soft and not very good. I ride pretty aggressively and I had a aprilia 660 before which had the same calipers (different master cyl) and the brakes felt way better and more direct because it didnt have such shitty OEM pads. I went for a quick ride after changing the pads and now the brakes feel waaay better and more direct. Paid like 60 bucks for both sides and also cleaned out the pistons and everything while i was at it. Can only recommend it to any 937 owner, because the OEM brake setup with the M32 calipers would be really good but the shitty pads are kind of ruining everything. I cant tell yet tho if the brake shudder issue i had is fully gone. During the test ride i felt like sometimes the front ent wasnt pulsating/grabbing anymore but sometimes it was still there but i hink it takes some time for the new pads to "brake off" all the uneven deposit from the stock pads. I heard that its a problem that the OEM pads also dont really "clean" the rotor well enough so thats why i thought id give the HH a try in the first place. Will go for another ride tomorrow and bed them in a bit more and see if it gets better but im pretty confident.
Got Redstuff for street use only. Everything is fine.
Last set of pads were yellowstuff, they had a nasty bite when low speed braking and whined terribly. Switched to greenstuff, i like them.
Nice middle ground in brake performance, no whine, no low speed bite, no oem shimmy.
Bought reds, burned through them, bought blues, i like them better. A touch more grabby at slow speeds, and slightly more dust, but they held up at an HPDE no problem. The reds did not.
Ebc yellow stuff pads are pretty nice. Got em on my NB. Wouldn’t hurt to replace your pads with those. Break in process asks for new rotors but you can probably get away without em if you really don’t wanna do it, I did.
I put ultimax on my 3, and I can stop on a dime.
For what it's worth, I had the shudder too, it was pad deposits on the rotors. New EBC pads, some hard braking, and it went away.
These brand new EBC front pads got a bit cooked on my GR Corolla after a 2-day event at Watkins Glen. She still stopped without any drama at the bus stop, but it's concerning I ran through them this quickly.
I've used Yellow Stuff about 4 times on 4 different cars. I drive very aggressively on the street during midnight haulin ass events. First off, even on the street I glazed them on all 4 cars. The one car I fried them in one night, and they cooked my rotors too.
Strange but the EBC blue stuff pads had a bad flutter but when I switched to G-Loc pads it completely went away. So bizarre
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
