I use Hawk Blues on-track and street pads off. Pads are so easy to change on our cars that it is only a 30 minute job to swap before each track day once you have some practice. The Blues are very abrasive and will clean any bedding material off the rotor if you just lightly ride the brakes for a few minutes while the pads are cold. The Blues have plenty of stopping power when cold on the street, but squeal a lot and eat through rotors very quickly. On-track they have been fade-free for me with excellent modulation using ATE TYP200 brake fluid.
I really liked the Hawk HPS 5.0s on my WRX. Good enough for the track and plenty comfortable for the street
I put Hawk Performance drilled and slotted on my 2017 STI. Ceramic pads. Have saved my car a couple times when assholes decided to jump the line and do a U-turn in front of me.
I swap mine the day before. They aren't race pads, just hawk hp+. I wouldn't want to daily them, they're loud and dusty but work totally fine on the street so I drive them to my track days
I think getting some nice aftermarket brake rotors and hawk pads would be good.
My latest setup is below and works well for the handful of HPDE’s I’ll do each year. Fronts: Hawk DTC-60 pads
I'm running Hawk HPS pads with Raybestos Professional grade rotors. Got 5 years out of my first set, at 6 years now on the current set.
I have Hawk HPS pads and they work great on the street and produce way less dust than stock pads.
I used these Hawk brake pads for a HPDE track day so they did get very hot. They still have 10mm of thickness left, but this particular pad has these very pronounced cracks. All other pads have very minor cracks (barely visible), but this one was the worst.
I ran Hawk DTC60's for one event. They dust like crazy which isn't the end of the world by itself, but if the dust touches any moisture at all (like the rainy track day) it mixes into what I can only describe as ferrous concrete. So not only is the dust-crete impossible to remove by any normal means, it then rusts like crazy, turning whatever wheels you have into a runny orange mess. I tried multiple different wheel cleaners, multiple brushes, soaking, anything and nothing could get it off. I had to use scotch brite and scuff the hell out of the wheels to get it off. Fortunately I run cheap TRM wheels and it's a track-only car otherwise I would have been livid.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
