Brake pads JURID or OEM KIA
I changed my wife's KIA Soul pads at 60k miles. Used OEM pads. Checked a month or two ago and they were still halfway through. She is at 200k miles.
I have a 2015 Kia Soul I bought new. In over 9 years, not a single thing has gone wrong with it - no repairs of any kind. Just oil, brakes and tires.
Buy pads and the sensor from FCP Euro. Use their lifetime replacement warranty for the next set. Went to the dealer in July for an alignment and they recommended pads for a similar price. I bought pads rotors and sensors for front and back, total was $1000 for BMW parts. You could save with Jurid which is listed as OE and OEM. My pads are at 4mm all around so I'm actually waiting for the sensor to trip before doing the job.
The Jurid pads did work. They were 13.8mm that seems to be the key.
Good braking, squeak free, low dust. The OE pads are great. They have good initial bite, no noise, high quality but they are semi-metallic so they make a bunch of dust. There are ceramic pad options that are low dust but they can be squeaky and won’t perform that great until they are warmed up. And of course you can get bargain bin organic pads which will have low dust but won’t perform nearly as well as stock. It’s a trade off no matter what. I went with the OE Jurid pads. I’d rather clean my wheels than lose braking performance or deal with noise. Also keep in mind that the rotors matter with noise and dust too.
I'm running the JURID pads, too, and I'm at a little over 13k miles. No issues whatsoever...
Front brake pads are worn. I have a new set of Jurid OEM pads that will come with the car.
The pads were about 60% worn and hard large metal shards embedded in them and the rotors have always been badly grooved from day 1. This suggest that its more likely the rotor that is a soft material. Once there are metal shards in the pads that will cause uneven friction and promote brake grab and pulsing. I replaced the pads and the \u201cwarp\u201d pulsing has gone completely, but I suspect the new pads will also eventually pick up metal shards from the rotor. The other point is in case people want to avoid factory pads is that the front pads are Jurid and the rears ATE. I ve replaced all with Padid.
When I picked her up, I was told my front and rear brake pads are all down 1mm already. At this rate I’ll likely need to replace them around 15k. I thought this made sense for the front pads since they’re the JURID high performance ones, but the rears being worn that much seemed strange. I don’t drive fast/brake hard/etc, never track, or do anything otherwise that should wear my brakes prematurely.
Volkswagen uses Jurid and Pagid Black compound brakepads as OEM on our Passats. The problem is that these pads take a very long time to correctly bed into the brake rotors. If these pads aren't bed correctly, over time they will wear unevenly on the rotor which causes vibration. That vibration is what causes your brakes to squeal!!
Write your review
Help others - share your experience with this part.