Consider Project Mu Club Racers. They’re not the most aggressive pads but hold up decently well on track depending on your pace and are surprisingly streetable.
I had a 2008 Ford Fusion and drove by large long distance (commuted for a while between SFO and LA).
Eventually I moved to the East Coast and needed to do mandatory car checks (started in DC). When we finally moved to NYC I was at the garage and needed to do the inspection. The guy said he cannot let me pass, because the brake pads where at the limit. I ask him to change them and mentioned that this is the first replacement of my brake pads and he was shaking his head in disbelief because I had almost exactly 100k miles on my odometer. I explained to him that almost 90% of the mileage was long distance ( minimum of 200 miles on way trips) and he still was saying “He never saw anybody having their first brake pads replaced at 100k miles”
Pretty happy with my PMU 999s. They’re a step down from csgs but so much cheaper even with tariffs on imports.
Braking is mostly regenerative, instead of using the brake pads. Your brake pads will probably last between 100k - 200k miles.
I paid $750 for it in 2007. It had a lunar odometer (north of 400,000) and the gas gauge stopped working so you had to write the mileage on a sticky note and slap it on the dash. The seat belts were *sawed off* and all the safety features deactivated. The brakes were high-dollar Brembos and I owned it for three years as a scrap hauler and fishing access get-to-er. I sold it for... $750. To a teenager. He probably still has it. 91-95 F-150 for life. Those things were TANKS and will survive the apocalypse, same with the Chevy 1500s of the day, especially the Silverados.
IMO the best are Project MU-HC+. in my Megane RS I could treat the HC+ as a track pad and go all-out for a full session, they'd just wear pretty fast at high temps
I bought a bike off a coworker and took it in to be serviced. Turns out the bike I bought was the equivalent of a model T Ford. They didn't make the brake pads for my model any more kinda old.
Is it a reasonable price? No not really. Can you just do it at home in the driveway? If you have a driveway, and it's nice if you have someone around who's done it before who can remind you to do things like properly torque the bolts instead of just "by feel" if you're new to this, or add a little anti-seize on the hub so you can get it off in 5 years, without giving you silly quirky advice like a lot of YouTubers like to do to try and make themselves slightly different. What _should_ you do? My suggestion is call a few local shops (even Ford dealerships if you want). Tell them you've got some rotors and pads (order some standard ones off of Rock Auto) and ask what they would charge to install it. Call 5 places, ignore the most and least expensive ones, and if the remainders pick the one you like the look of (check online reviews, see how long they've been in business, etc). Every mechanic has been changing brakes since they were 12, but you want one who looks like they care about their work. A good mechanic with a 2 post lift should be able to do a Mustang brake job in like 20 minutes if they tried to. They'll actually take about an hour and be careful about it. They'll charge you some "standard" hours regardless of clock time because they need to pay for their shop etc. It's cheaper to do it yourself, but not everyone _wants_ to do it themselves, or trusts themselves to learn something from YouTube videos that their life depends on every day.
Fiesta ST brakes are terrible. Just replace the discs and pads....again....
When we bought our Ford lightening... the sales person told me with a strait face "people think that evs go through less brakes, but really its actually rhe opposite" when trying to sell me a maintenance package...
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The brake caliper OEM BMW got the first review!
The brake pads OEM Infiniti got the first review!
For wiper blades PIAA already 100 reviews.
For battery Energizer already 25 reviews.
In the rating best water pump already 12 brands participate!
In the rating best timing belt already 13 brands participate!
In the rating best head gasket already 3 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating tires for Subaru Outback already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
If choosing brake pads across many manufacturers, check the part ranking. If your choice is down to two brands, the PartReview part comparisons help.
We compare brake pads across these categories:
In March 2026 on PartReview, brake pads Project Mu were overall better than OEM FORD.
Brake pads OEM FORD and Project Mu were equally popular according to data in March 2026.
By vote balance, brake pads Project Mu surpassed OEM FORD:
By number of reviews, brake pads OEM FORD surpassed Project Mu:
In March 2026, according to PartReview, these manufacturers led the same number of car-specific ratings:
OEM FORD are chosen by owners of cars such as: Ford Focus, and others.
Project Mu are chosen by owners of cars such as: Renault Megane, and others.
If this comparison didn’t fully answer your question, there are many others on PartReview.
For example, comparisons of brake pads OEM FORD with: EBC, POWER STOP, Akebono, Hawk Performance, Brembo, Ferodo, OEM Volkswagen, Bosch, STOPTECH, Carbotech.
Also available: comparisons of brake pads Project Mu with: EBC, POWER STOP, Akebono, Hawk Performance, Brembo, Ferodo, OEM Volkswagen, Bosch, STOPTECH, Carbotech.
You can also see who is better among other brake pads manufacturers: EBC or POWER STOP, EBC or Akebono, EBC or Hawk Performance, Brembo or EBC, Akebono or POWER STOP.
