Brake pads OEM Subaru or Raybestos
I always recommend the Raybestos Element3 EHT pads and rotors. We use them at work and have very little comebacks. Low noise, low dust, great pedal feel.
I usually get aftermarket Raybestos pads if/when available.
I have Raybestos AT's(96087) on my front, and Hawk HPS HB418F.646 pads. Don't think Hawk makes the HPS pads anymore though. I'm at about 2.5 years on mine, got 4 years out of the last set, after putting up with the OEM's for 4.5 years. Still on the factory rear drums.
Far better than OEM.
So I don't work for Raybestos but I do install a ton of them. Those EHT are really good for normal vehicles. The price is right, dust is low, pedal feel is great, friction is about on par with OEM and in some cases better. They will survive about 10-15 medium effort stops, and about 3-5 Hard ABS stops. I wouldn't put them in anything bigger than a 7-Seater V6 Crossover, and the weight of those is on the limit of what the pads can do, but over all very good.
The brakes I got from them are the Raybestos Element3 pads and rotors. Working great so far!
I will move to Raybestos EHT or PowerStop Z23 or Z26 when its time. Wagner has Thermoquiets for those with ear problems.
I'd just buy any of the old line good quality aftermarket that are aiming at OEM. Raybestos, Bendix, Wagner. Or just buy BMW OEM.
I had an 2017 Outback 2.5, had it since April of 2017 until last week, during that time I put on 93k km on it. I wish I had gotten the 3.6, I got the 2.5 hoping to save fuel, my average was around 25mpg for lifetime, and I drive a lot on hwy and country road, I never once was able to hit the 30mpg even if it's just me in the car and driving 50mph on the country road, this part I really feel like Subaru should correct their mpg reading, in winter it can get as bad as 18mpg in the freezing weather, as when it's cold the transmission will make the engine constantly rev at higher to warm it up, the 2.5 is also not a smooth engine when at idle, I had a vibration issue that was deemed normal. Overall, it's a reliable car, but its not a durable car, another thing is, when taking off quickly from a stop, it can really bog down, most people are used to first gear and just boot, but these CVT don't have first gear and it can be rather unexpected, I've almost got hit from behind a couple times from that. The eyesight is a good feature, the lane departure can be annoying at times but I was ok with it, these cars have an issue with windshield chipping, and if the car has eyesight, the windshield need to be a specific one and then the eyesight needs to be re-calibrated, this happened to me TWICE, and it got expensive very quick. OEM tires are lousy, by lousy I mean it doesn't even get good mpg, doesn't get good grip in ANY condition and puncture easily if you take it to any sort of gravel road, I had puncture the tire within 1200km, I just got some decent A/T tires after, no problem for the last 90k. The brakes are soft, so first thing I did was changed the pads.
Just replaced rear brakes on my ‘15 rogue with Raybestos E3 pads. I really had to force the pad into the new hardware clips. I did a quick google search and his seems to be an issue with E3 brake hardware. The original brake pads were also really tough to remove before I put the new ones in.
So I mentioned to Mike at GiroDisc (who is great btw) that I was in the market for pads, and he recommended Raybestos ST43s, which get great reviews. So I went with them, but two events ago they put deposits on the rotors so bad the car shook like mad after a few laps. I still had the HT-10s with me, so I swapped them, they wiped the deposits off and I was back in business for the day.
Write your review
Help others - share your experience with this part.