I just installed PowerStop z23 kit myself. The breaks are great plenty of stopping power but the initial bite of the pads are different. Also almost no brake dust.
Last one lasted me 70k miles roughly. Rotors and pads. Solid choice.
Put them on my Mercedes back in September. Absolutely no complaints. Plus way less brake dust.
I redid all four on my 2014 A4 allroad. There was. Virtually no brake dust and no squeak or squeal with excellent stopping power.
Ya I had them on my a3 and it was dramatic difference than oem. Only down side is slotted and drilled make noise when you brake hard with them.
Replaced the pads on my Audi A4 with powerstop, and they're a big upgrade. Significantly less brake dust from the OEM too.
I have used the power stop Z36 pads with drilled and slotted rotors on the last 3 trucks I’ve had. I love them. I tow a 8-12k pound dump trailer pretty regularly and have never had an issue. Even with the added weight, they still outlast and outperform OE style by a long shot.
Z26 power stops with oem 1.8 brackets / calipers. They’re carbon ceramic brakes, they produce almost no brake dust, they don’t squeak at all and they brake REALLY good for street driving. ( get the power stops by rockauto as they’re way cheaper and you’ll get the better model for the price of the z23’s. Be sure to put in the 1994 year and not your 1.6 car so you get the bigger brakes Then get the calipers from treasure coast Miata ( they’ll be like 25$ each) . I just did that swap on my car and it’s phenomenal. ( I also got steel braided lines which makes the pedal feel so much better ). They fit perfect under my stock 14” daisys, the only thing I had to do was bend back the little brake dust guard on the rear brakes so they could clear it. ( because they’re made for 1.6’s. It takes about 10 minutes then you’re done )
All in all the brakes and calipers were about 500$ plus another 100$ for the steel braided lines which were definitely worth it. I’d just swap it all at once because your brake lines by now are expanded and unhappy.
Also I’d consider upgrading your cars brake fluid from the stock DOT 3 to DOT 4 which has a way higher heat tolerance and is good to drive on the streets. ( I recommend pentosin DOT 4 fluid which is what I run in my daily )
I don\u2019t have warping or shimmy issues but above 50ish mph when braking I get this loud whirl or hum type of thing. It\u2019s very loud it\u2019s from the rear. I never had this issue on my s3 and it\u2019s the same setup minus the pads. Not sure. I\u2019m thinking of getting golf r or s3 pads and installing them.
I put a set of power stops on the wife’s SUV the weekend before we got married. They lasted maybe 12,000 miles? Maybe less? They warped and started chattering something awful. Wound up doing rotors, pads and calipers on all four wheels: Raybestos coated rotors and heavy duty pads, haven’t had a problem since.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake discs FEBI got the first review!
The power steering pump OEM Volvo got the first review!
The brake pads OEM Infiniti got the first review!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best windshield already 14 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating battery for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
For headlights OEM Volkswagen already 50 reviews.
For brake caliper OEM Volkswagen already 25 reviews.
For tires GISLAVED already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
