Brake pads Raybestos or Project Mu
I have Raybestos AT's(96087) on my front, and Hawk HPS HB418F.646 pads. Don't think Hawk makes the HPS pads anymore though. I'm at about 2.5 years on mine, got 4 years out of the last set, after putting up with the OEM's for 4.5 years. Still on the factory rear drums.
Far better than OEM.
So I don't work for Raybestos but I do install a ton of them. Those EHT are really good for normal vehicles. The price is right, dust is low, pedal feel is great, friction is about on par with OEM and in some cases better. They will survive about 10-15 medium effort stops, and about 3-5 Hard ABS stops. I wouldn't put them in anything bigger than a 7-Seater V6 Crossover, and the weight of those is on the limit of what the pads can do, but over all very good.
The brakes I got from them are the Raybestos Element3 pads and rotors. Working great so far!
I will move to Raybestos EHT or PowerStop Z23 or Z26 when its time. Wagner has Thermoquiets for those with ear problems.
I'd just buy any of the old line good quality aftermarket that are aiming at OEM. Raybestos, Bendix, Wagner. Or just buy BMW OEM.
The best solution I have found is to use slotted rotors--cryo treatment typically gets me 10K more miles before hard spots develop and I get a pedal vibration--and an aggressive pad without any ceramics. My solution is to use the best quality slotted rotor I can find, cryo treatment preferred, and use either a Wilwood BP-10/20 pad or a Project Mu NS brake pad. I found those two pads were aggressive enough to have great stopping power and would wear out the rotor at the same rate the pad wore down.
I personally use Project Mu HC+800 for their fantastic cold bite and high temp resistance.
AC Delco for electronics. Moog for suspension. Raybestos for brakes.
brakes are replaced by Raybestos Police purpose built brakes, and any other part, interior or exterior, is replaced as needed.
Write your review
Help others - share your experience with this part.