Brake pads TRW or JURID
happy w trw ultra
I’ve been using trw ultra no dust,no sound and they stop real quick
I went with TRW Ultra ceramic pads and Zimmerman rotors from FCP Euro for my S90. It was a big upgrade from OEM in my experience.
I have the TRW ceramic brake pads on my E92 and they are excellent.
The Jurid pads did work. They were 13.8mm that seems to be the key.
Got TRW pads from FCP, they work really well!
I got the ceramic TRW pads from FCP euro. You can find them from ShopDAP, VW dealership, etc. There’s multiple OE suppliers that all work great: TRW, Pagid, Textar. You can also go for the semi metallic equivalent if you want a little extra bite. I believe they all come with the wear sensor, you can simply cut it off at the base and pull out the wire. I’ve done this twice now, no problems. I suppose you could use the advance auto ones if you already have them, but just know they probably won’t give you as much bite as the stock pads, and may end up causing some warping over time since they aren’t designed for the heat temps.
Good braking, squeak free, low dust. The OE pads are great. They have good initial bite, no noise, high quality but they are semi-metallic so they make a bunch of dust. There are ceramic pad options that are low dust but they can be squeaky and won’t perform that great until they are warmed up. And of course you can get bargain bin organic pads which will have low dust but won’t perform nearly as well as stock. It’s a trade off no matter what. I went with the OE Jurid pads. I’d rather clean my wheels than lose braking performance or deal with noise. Also keep in mind that the rotors matter with noise and dust too.
The pads were about 60% worn and hard large metal shards embedded in them and the rotors have always been badly grooved from day 1. This suggest that its more likely the rotor that is a soft material. Once there are metal shards in the pads that will cause uneven friction and promote brake grab and pulsing. I replaced the pads and the \u201cwarp\u201d pulsing has gone completely, but I suspect the new pads will also eventually pick up metal shards from the rotor. The other point is in case people want to avoid factory pads is that the front pads are Jurid and the rears ATE. I ve replaced all with Padid.
Changed the front brake disc and pads (TRW brand) on my car (Opel/Vauxhall Astra J 2016) and noticed my car started to smell heavily burnt rubber after heavy braking when the car stops. I understood that brakes does this in the beginning but now it has gone s month and probably around 150km (100miles) and I also have made some emergency brakes from high speed to speed up this process. So two weeks ago I removed everything and really deep cleaned the caliper and checked the pads. From smelling the pads it seems like it is the glue between the brake pad and the anti squeak plate that cause the smell (?) I also checked the temperature of the brake disc after normal usage and they are all around the same temperature, so I doubt it is a frozen caliper. (Around 70c 155f) but still they smell, maybe a bit less.
Write your review
Help others - share your experience with this part.