Brake pads WAGNER or OEM Honda
I put 68k on my 21 accord in about 2 years. Pads were all at 7mm. 80 percent highway, 20 percent city.
Last year on my 2013 I put on Wagner QS pads and Centric rotors, so far so good.
For years my brakes on my CRV squeaked. My dad replaced them. A few other people/shops worked on them. Still squeaked. I'm talking YEEEAAAARRRRRS. I resigned myself to being *that person* at every friggin stop light. Needed new brakes again. Unique situation as it was, the Honda dealership ended up doing it. It was like $500 but they stopped squeaking!!!! It was heavenly to be a silent stopper.
My favorite is Wagner OEX pads. They're build on galvanized steel and the friction material is mechanically attached instead of glued on.
Wagner OEX or Bosch Quietcast
Both are ceramic brake pads that will last longer. Brake fade is experienced in all brakes used excessively but it takes a lot longer in ceramic pads. The only draw back is stopping distance is slightly increase when cold but when warm it's decreased. Bonus is they produce less dust & its very light in color so your wheels look cleaner.
The best pads out there right now are the Wagner OEX pads cuz they're built on a galvanized steel backing plate with a mechanical fastening system for the friction material instead of glue. They don't rust out like plain steel pads
Wagner OEX brake pads are some of the best around. They're built on a galvanized steel backing plate to reduce rust and the pad material is connected to the plate with a mechanical attachment system instead of glue. Wagner is a Tier 1 supplier to several carmakers.
Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.
Seeing what looks like a Prelude wheel, why not just get the OEM honda brake pads? They are acceptable for most daily use, and the brake dust isn't to terrible to deal with
If there's a sore point on the Si, it's the brakes. It's that initial application is far too touchy, making smooth heel-and-toeing difficult especially when only light brake application is required. That abruptness proves annoying even in hard use, and the slightly spongy pedal feel doesn't help matters.
Write your review
Help others - share your experience with this part.