Brake pads WAGNER or OEM Toyota
recently went to brakemasters to get brake pads for my 2014 rav 4. Set of front brake pads only ( 4 pads) with labor total $180.
Man I love my old Corolla. $20 for front brake pads and a half hour of relaxing wrenching to do the job.
Wagner OEX or Bosch Quietcast
Both are ceramic brake pads that will last longer. Brake fade is experienced in all brakes used excessively but it takes a lot longer in ceramic pads. The only draw back is stopping distance is slightly increase when cold but when warm it's decreased. Bonus is they produce less dust & its very light in color so your wheels look cleaner.
I've had my 2013, 89,000 miles, which isn't *that* old but still, and have had zero mechanical problems. Only maintenance and expected repairs like brake pads or air filters.
The best pads out there right now are the Wagner OEX pads cuz they're built on a galvanized steel backing plate with a mechanical fastening system for the friction material instead of glue. They don't rust out like plain steel pads
Wagner OEX brake pads are some of the best around. They're built on a galvanized steel backing plate to reduce rust and the pad material is connected to the plate with a mechanical attachment system instead of glue. Wagner is a Tier 1 supplier to several carmakers.
Wagner, Centric, Raybestos, Akebono are all very reliable brands. However, each one makes an economy, OEM and premium version. So don't go by brand name alone. Wagner OEX pads are premium quality. They're built on galvanized steel backing plates with mechanical attachment versus adhesive to keep the friction material on.
I put Wagner on mine. They have been good for around 35k miles on them so far. I don't see me replacing them for another 15k. I didn't like the OEM one and braking is really one of the weakspoints for the Mazda 6.
Toyota hybrids have no starter, no belts, no alternator to wear out and the brake pads and disks last around 100,000 miles due to little use
This happened to my Gen2. I gave it to some guy to change pads and these lights came out after. I think he didn't do it properly and air entered into the line. I then took it to a local Toyota dealership where they fixed it. (I don't recall what they did exactly, maybe flush and replaced the break fluid). I was fearing it was the actuator, which as other have posted, is very expensive on this Prius. I had to drive very slow and careful, because I had no power in the brakes, so they were hard and slow. No ABS. No regen either.
Write your review
Help others - share your experience with this part.