Sachs VR6 Clutch Kit
Reviews of Sachs parts For Business
Germany
Monroe != OEM. OEM is Sachs I believe. In actuality, Sachs OEM is probably better quality than any aftermarket manufacturer short of a full motorsports setup.
Ive been reading good thing about sachs..??
I have been experiencing the usual clutch slippage that many of the Golf R's with Stage 2+ have been experiencing....and after much debate and searching I decided to go with a Sachs SRE Performance Clutch kit. Today was the install...and the single mass flywheel kit (883089.000034 - http://www.sachsperformance.com/Sac...I-169-kW-;-BYD-;-09/2006/SRE-Performance-Clutch-Kit-One-Mass-Flywheel::155.html ) bolted right up with no issues. The clutch is stiffer then stock....it's hard to put a % on it...but it's stiffer then stock. It's not too stiff though - I've had two knee surgeries on my left knee and I didn't have any issues with it driving around. I haven't heard any of the \"clatter\" that has been associated with the single mass flywheel. I do have a slight groan when accelerating heavily at low rpms.....and it is a little louder then stock when I let off the gas and coast...but nothing that is going to bother me. The clutch release is a little higher then stock. The new setup is more \"spot on\" when being engaged....and you can really feel it grab. Overall I don't think my wife will notice the change....and I am happy with the results.
:sly::facepalm:
I have an 03 AWP GTI 1.8t. My clutch was dying on me recently and I did some research. I went with Sachs VR6 Single-mass lightweight 14lbs flywheel clutch kit. The clutch feels a bit different for sure, in my opinion. This is just what I have experienced and may not be the same across the board. On the highway in 5th gear, when I hit around 3k RPM's, I get a drone while accelerating and sometimes while coasting. It's sort of a low, pulsing sound. It goes away as soon as I disengage the clutch and coast though. Also, at first, the clutch was super \"grabby.\" Like... more sensitive than my stock clutch. I've finally gotten used to it (2 months later).
i have the parts you need to replace
You can buy a brand new Sachs flywheel from rockauto.com for $50. I recommend a Genuine Sachs Cultch Superset (Sachs factory packaged clutch set).
i'm gonna order this stuff from ECS this week
I blame the part. I bought a Sachs 16v kit too, when I put a big spline tranny in my last diesel. Same thing happened in less than 5000 miles!!!! The rivet straight up FELL OUT!
Write your review
Help others - share your experience with this part.