The clutch is light, the brakes feel solid, and the manual steering has a good, confident feel. The engine doesn't lug even if you bring it down to around idle speed, provided you're in the right gear.
Good braking, squeak free, low dust. The OE pads are great. They have good initial bite, no noise, high quality but they are semi-metallic so they make a bunch of dust. There are ceramic pad options that are low dust but they can be squeaky and won’t perform that great until they are warmed up. And of course you can get bargain bin organic pads which will have low dust but won’t perform nearly as well as stock. It’s a trade off no matter what. I went with the OE Jurid pads. I’d rather clean my wheels than lose braking performance or deal with noise. Also keep in mind that the rotors matter with noise and dust too.
It crossed my mind to get into a battle with the dealer over a wearing part given the mileage but I figured the best i had to hope for was replacement trash. I used high quality Zimmermann rotors and EBC red pads all around. I’m out $400ish yes but i know i have good stuff on now that will last. Brakes better now than it ever has.
Centric ceramic brake pads
I've had good results with Ferodo DS2500 pads. More torque than stock, dusting about the same.
I run EBC yellows year round with no issues or noise on street and track. I would recommend them, switching to stainless lines and chaining to RBF600 brake fluid.
Pal has Volvo brakes on his bmw E10.
A popular way to get bigger brakes on your Honda civic is taking the brembos from an Acura TL.
Not the OP but I want to change the fronts to anything lower in dust, these things are a mess.
Prior to a long roadtrip a few months back, I decided to swap a slightly more aggressive rotor/pad combo onto my car. Nothing crazy, just a bitier pad and more durable rotor. Having always been a Bosch/Brembo guy, I decided to try out EBC, as its apparently a pretty sporty setup to run. So no big deal, I order the set, I pop them on, I break them in, and I go on about my business --> or so I thought. I don't know if this is an EBC exclusive feature or what, but the brake dust is atrocious. This stuff sheds itself more than a housecat coughing up balls of hair. It was only about 750 miles into use that I started to experience horrendous vibrations from the actual pads and rotors depending on the temp of the brakes and how hard I'm pressing. Its not a 'traditional' warp, but rather most certainly just huge build-ups of pad sediment, as these vibrations are intermittent. Anyone else have experience with EBC's? I've done about 5K on them and they're honestly pretty sh*t in my time with them. Likely going to go back to Bosch. Here's images of the dust collection only about 100-200 miles after I cleaned them. Seriously, whats the deal?
Write your review about brake pads
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake discs FEBI got the first review!
The brake discs Mintex got the first review!
The power steering pump OEM Volvo got the first review!
For wiper blades PIAA already 100 reviews.
For tires OEM Toyota already 25 reviews.
For battery Deka already 50 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best thermostat already 15 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating windshield for Subaru Outback already 5 brands participate!
In the auto rating battery for Volkswagen Golf already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
