Best bang for buck brake setup on a Corrado/Mk3 Front: 11.3 DE's with Tyrol Sport Bushings and a proper pad and brembo OE rotors Rear: Stock rear, Mk4 Calipers, proper pads, and brembo OE rotors. Rotor material is too often overlooked and a must for proper performance. Brembo seems to have the best metallurgy IMO.
I did buy replacement rotors (Brembo) and pads (Bosch quietcast) from FCP and I have no complaints.
Picked these up because my ultimate goal was to do something OEM+. These were drilled with a very OEM like coating and when the calipers were painted blue it looked identical to those R32/R36 brake set up. Although I only had them for a short period of time, I've previously used e-Line on other cars and had no problems just like the Premium one.
i have them on my 1998 Golf GTI What i have used since 3 months: ... R1 concepts brake discs (not a famous brand but really nice discs) And then it's plug and play. Pedal feel is very good and it brakes very good!
I have solid BREMBO rotors, girling calipers and I think that you can get slotted rotors in the 'solid' width....just a different kind of venting.
The best rotors for the money aren't slotted or drilled, is the honest truth. Drills and slots are supposedly there to relieve the film of gas that comes off of hot brake pads and forms a low-friction cushion between the surface of the rotor and the surface of the pad; the reality is that formulations in brake pad materials in the last twenty years have reduced this gas by 90+% and have rendered slotted or drilled rotors as an aesthetic option, not a performance option. If anything, slots and holes lead to increased brake pad wear, higher likelihood of rotor warp (I've experienced it first hand at the 2011 Fastivus track day riding shotgun in someone's MkIV R32...over the course of a few laps, his slotted rotors went from smooth to warped enough to be garbage; post-session inspection showed they visibly warped at the slot lines) and higher likelihood of cracking and failure around holes as well. What's more, depending on the pattern of holes around the face of the rotor, you'll develop uneven wear across the brake pad surface, actually reducing the area of pad-to-rotor surface contact area over time. Only the best (usually patented) hole patterns avoid this issue, Porsche's proprietary hole pattern being one I know of for sure. The half-slotted/half-drilled rotors are the worst because the holes are placed in a geometrically symmetrical way on the rotor face, not in a hole pattern that is best for the life of the pad...purely "for looks" and honestly a garbage choice. Brembo plain rotor OEM replacements are the most expensive direct-OEM replacement rotor but are, IMO, worth it (I put 80,000 miles including several track days on my 11.3" Brembo plains and they held up very nicely). ECS is selling Genuine VW/Audi rotors for $190 a front pair which are probably your best bet (OEM = Brembos, at least on my GTI...whatever they use, it's not a bad disc at all). Getting a disc with curved vanes instead of straight vanes should help with disc cooling and longetivity, as a general rule. As for pads, you'll get a lot of different opinions on that. I like my Hawk HPS a lot, I know people who adore their Ferodo DS2000s and DS2500s. You're going to hear rather mixed things about EBC Greenstuffs but there are a lot of people that like those too. Porterfield is a very reputable brand though I'm not sure if they offer anything that's especially street focused or if they tend to just market to HPDE/Autocross/Road Race use. I came to the conclusion a few years ago that Mintex is kinda cheap and not that great.
Buy good quality rotors such as Zimmerman, Brembo OEM ( surprisingly affordable ) Wagner, Raybestos or Bendix. Stay away from cheap s**t like Powerslot or other Taiwanese made garbage.
I can certainly feel the difference between my brothers Brembo with slottted setup vs my boring yet effective Honda oem stuff.
I got brembo rotors and some other german pads, not really sure what they are, squeeky as of the 4 days so far, we'll see it it gets better.
I already have slotted and x-drilled brembo's with pagid blue box all around. I'm in need of replacement since the fronts are warped.
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Brembo or POWER STOP
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake discs FEBI got the first review!
The power steering pump OEM Volvo got the first review!
The brake pads OEM Infiniti got the first review!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best windshield already 14 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating battery for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
For headlights OEM Volkswagen already 50 reviews.
For brake caliper OEM Volkswagen already 25 reviews.
For tires GISLAVED already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
