Ferodo DS2500 paired with Zimmerman blank rotors and Motul RBF600 is what I use. The tracks I go to are more technical and not fast so it's great for my use case. I imagine if I went to a track where speeds are above 150Km/H and have long, fast corners, I would need better pads. I'm considered intermediate to advanced and last ran a 1:47 at CTMP DDT with worn Vitour Tempesta Enzo tires. I think I can run low 40s this year. I would not track with stock pads. I overheated my pads and brake fade hit hard. The pads melted and I went off the track and almost over the hill at TMP (Cayuga).
I used DS2500 for my first 2 track days but outgrew them rather quickly on a 2800 lb car. Last time I swapped to DS1.11 and felt much more confident braking deeper into corners with zero fade at my intermediate level. Now I just use DS2500 for the street and canyons.
if you want raw stopping power then Ferodo DS2500's are great.
I was a huge fan of Ferodo DS2500s on Centric rotors. They performed insanely well for street duty and were decent enough for track days.
Habe schon alle Marken durch von Brembo bis zu Zimmermann.... Nur ATE hats drauf, werde nur noch deren Bremsen kaufen.
ATE und Schluss aus. Damit hatte ich immer top Qualität und nie Probleme.
Ferodo DS2500 is about the best pad you can get.
Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.
Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)
My rear pads cracked after 3 months, 4k km of use.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake discs PILENGA got the first review!
The brake fluid DIXCEL got the first review!
The brake pads APP got the first review!
For tires OEM Toyota already 25 reviews.
For battery Deka already 50 reviews.
For brake caliper OEM Volkswagen already 25 reviews.
In the rating best engine radiator already 9 brands participate!
In the rating best turbocharger already 4 brands participate!
In the rating best fuel filter already 5 brands participate!
In the auto rating windshield for Subaru Outback already 5 brands participate!
In the auto rating wiper blades for Ford Fusion already 10 brands participate!
In the auto rating tires for Toyota Corolla already 50 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
