Brake pads EBC or Project Mu
I've been happy with my EBC Red stuff pads. Stop great, are quiet and best of all cut my brake dust significantly.
I just got green stuff for my wife’s ‘14 sport. It does feel better under braking than it did feel. I just used stock type rotors as it isn’t aggressively driven so no need for better cooling.
I installed EBC Red Stuff street/track pads on my 2008 Mazda 6 about 10 or so years ago - front pad set only. I selected the Red Stuff pads because I wanted the performance of a trackable pad set, and I got it! The pads were also advertised to be a "low dust" formulation, which we all desire, of.course. I installed them with ceramic pad grease, and did the brake pad bedding procedure as specified by EBC. Prior to installing and bedding the pads, I had the beginnings of very slight front brake pulsation/lateral rotor runout. Believe it or not, this pulsation/runout was resolved after performing the bed in procedure and did not recur. I got the performance increase that I sought - the difference was GREAT, even though I did the front pad set only and the car's stopping power was already good. I found that the pads were not really low dust, at least by my interpretation.
I upgrade to EBC yellow stuff and R1 Concepts drill and slots rotors,ECS tuning brake lines and Motul brake fluid. Very pleased,definitely recommended setup
I run EBC Redstuff pads and they’re good enough for regular driving. Way less dusting than OEM pads.
I'm running EBC's GPFAX on my 636 and Vesrah RJL on the R3. EBC is great bang for the buck, plenty of confidence, never had fade, great bite. Far better than OEM.
I like my EBC red stuff. A little dusty.
The street type are great all rounders, reasonable bite and minimal drop off. Pretty low dust and noise, and wear was terrific. The set I had lasted longer than the oem pads I had before them. The performance of the track orientated pads is absolutely insane. The initial bite is like no other pad I've ever had. It drops off a tad but still great stopping power. However dust and noise are pretty terrible.
I've got EBC reds on my car and they feel decent from cold.
I faded the yellows a few times (on track) and they were way dustier than HPS.
Write your review
Help others - share your experience with this part.