Ya I had them on my a3 and it was dramatic difference than oem. Only down side is slotted and drilled make noise when you brake hard with them.
Replaced the pads on my Audi A4 with powerstop, and they're a big upgrade. Significantly less brake dust from the OEM too.
I have used the power stop Z36 pads with drilled and slotted rotors on the last 3 trucks I’ve had. I love them. I tow a 8-12k pound dump trailer pretty regularly and have never had an issue. Even with the added weight, they still outlast and outperform OE style by a long shot.
I’ve tried nearly every pad on the list here and for a dual duty casual track and street car without needing the change pads I have found the stoptech sport and carbotech ax6 good if you don’t want to swap pads which is better for a first timer in my opinion. Otherwise ferodo ds2500 and the other ones in this thread are good if you get more experienced given time. The carbotech ax6 I am selling a set if interested brand new in box but they are expensive as are many suggestions on this list. The nice things about the stoptech is they are a true do all pad that is cheap as well!
Z26 power stops with oem 1.8 brackets / calipers. They’re carbon ceramic brakes, they produce almost no brake dust, they don’t squeak at all and they brake REALLY good for street driving. ( get the power stops by rockauto as they’re way cheaper and you’ll get the better model for the price of the z23’s. Be sure to put in the 1994 year and not your 1.6 car so you get the bigger brakes Then get the calipers from treasure coast Miata ( they’ll be like 25$ each) . I just did that swap on my car and it’s phenomenal. ( I also got steel braided lines which makes the pedal feel so much better ). They fit perfect under my stock 14” daisys, the only thing I had to do was bend back the little brake dust guard on the rear brakes so they could clear it. ( because they’re made for 1.6’s. It takes about 10 minutes then you’re done )
All in all the brakes and calipers were about 500$ plus another 100$ for the steel braided lines which were definitely worth it. I’d just swap it all at once because your brake lines by now are expanded and unhappy.
Also I’d consider upgrading your cars brake fluid from the stock DOT 3 to DOT 4 which has a way higher heat tolerance and is good to drive on the streets. ( I recommend pentosin DOT 4 fluid which is what I run in my daily )
For mixed street and track use, I haven’t found a better pad than Stoptech 309. Lots of dust, but no noise on the street and they will take an absolute beating on track (for a street pad). Great modulation at mid temps, low and high temps are acceptable.
Powerstop z23 or the z26 for the slotted rotors. I run them on all of my cars and we sell them at my automotive shop, great brand
At least for me, I'm using power-stop extreme pads.
Replaced it the with Powerstop and no issues at all, been 2 years and still perfect.
I've had a couple of bad experiences with Stop Tech pads ( High Performance division of Centric ). Euro made semi metallic pads are usually very good ( ATE, Brembo, Ferodo Valeo ). Bendix Titanium II pads are very good. Akebono Premium Ceramic pads are very, very good...
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
