Timing belt OEM Toyota or Gates
If you happen to need the timing belt, tensioner, water pump, oil cooler, thermostat housing, thermostat etc i have literally all of it brand new including the gates racing timing belt, all has literally 0 miles.
I have the gates racing Kevlar belt and I has given me no issues, there is no uneven belt wear or signs of damage and its been about 20k since I changed it
Gates T306rb for 16v aba or abf
I'm sold on the Gates Racing kevlar belts, seems like cheap insurance for $30-40 extra.
Part of the reason I run a Gates racing belt with the manual tensioner (dynamics of the belt). I'm a good 30K miles deep with this set up and the belt hasn't needed a single adjustment. I trust it just fine.
It's a great belt. Do it. As to noise, it's no more noiser than stock (aka not much noise at all)
So, a bit more longevity that actually holds up to the OE change interval with the conti belts is a plus.
Well guys.... Heres a little update. It was a bad water pump. Real bad. The car just rolled over on 145k. The original owner never had the original timing belt and water pump replaced. After taking everything apart, I realized how lucky I was that the pump was the only thing to go. The belt was severely cracking.
Mine goes naked, too. I got the fancy replacement kit from a vendor that supplied a pretty blue Gates belt. After I got it all together and running for a while I read of the horrors of Gates belts and the carnage that comes with failure. So, it goes naked and gets a look over each time the hood is open. That my reasoning.
i'm running a gates kevlar timing belt on my car with integrated's mechanical tensioner kit and there's a section of the belt that seems to be shredded off about a quarter of the width of the teeth.. the belt seems to ride closer to the engine so maybe that is why this happened? should i replace the belt with a new one? it only has about 6k on it.. shredded teeth..
Write your review
Help others - share your experience with this part.