Brake pads OEM Toyota or Project Mu
The pads seem to last forever on the street, and work really well on the track/ when warm
Still on the factory brake pads too.
oem for toyota brakes everything else makes noise for some reason
I have 112,000 miles on my 22.LE and no issues so far I even have original brakes
I stick to oem pads and rotors because they last a very long time.
Depends what you're after. If just street with some spirited driving, smething like pmu hc+ or ns400 works. I do track work and used to run hc800s, but got hc+ thinking they are the same. Only 600c rated instead. But, good cold performance, and extra good performance hot. So, they don't wear out super quickly while daily driving. Got quite a lot of track days and driving out of my original hc800s with t3 rotors. But, they are harder to find. Need to get the shape from pmus website, and then find somebody that stocks them. Rhd japan may do
I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.
One thing that I am surprised by are the brakes. They're still fine at 110k, and it's not like this 4,000lb beast has EV-levels of regen.
I found Project Mu Club Racers to be decently streetable for a track pad. They do squeal a bit at less than 25 but are tolerable as long as they’re bedded in and you’re giving a decent amount of threshold pressure.
Just changed a 4Runner with 80k miles, the pads were worn flat all the way down.
Write your review
Help others - share your experience with this part.